Аннотация:Emissions from four heavy-duty and medium-duty diesel vehicles were tested in six different aftertreatment configurations using a chassis dynamometer. The aftertreatment included four different diesel particle filters (DPF) and two prototype selective catalytic reduction (SCR) devices for NOx control. The goal of the project was to fully characterize emissions from various in-use vehicles meeting the 2007 particulate matter (PM) standard for the United States and California and to provide a snapshot of emissions from 2010 compliant vehicles. The aftertreatment devices all worked as designed, realizing significant reductions of PM and NOx. The DPF realized >95% PM reductions irrespective of cycle and the SCRs >75% NOx reductions during cruise and transient modes, but no NOx reductions during idle. Because of the large test matrix of vehicles and aftertreatment devices, we were able to characterize effects on additional emission species (CO, organics, and nucleation mode particles) from these devices as a function of their individual characteristics. The two predicting parameters were found to be exhaust temperature and available catalytic surface in the aftertreatment, which combine to create varying degrees of oxidizing conditions. The aftertreatments were not found to incur a fuel penalty.
