- Главная
- Ресурсы
- Библиотечный поиск
- Журнал «Промышленное и гражданское строительство»
- Выпуск 2014 г. № 6
Разработка состава тяжелого бетона с использованием местного минерального заполнителястатья из журнала
База данных: Каталог библиотеки СФУ
Библиографическое описание: Разработка состава тяжелого бетона с использованием местного минерального заполнителя / Б. Н. Середин [и др.]. - (Новые технологии, техника, материалы). - Текст : непосредственный // Промышленное и гражданское строительство. - 2014. - № 6. - С. 17-19. - Библиогр.: с. 19 (10 назв.). - ISSN 0869-7019.
Аннотация: Рассматривается возможность использования песчаных аллювиальных отложений р. Волги и ее притоков (кварцевые мелкозернистые пески с модулем упругости 0, 72-1, 23) в качестве компонента тяжелого бетона, а также влияние степени илистости песка на набор прочности образцов тяжелого бетона. Исследования подтвердили возможность использования в качестве мелкого заполнителя местного речного песка для получения тяжелого бетона. Кроме того, установлено, что исключение илистых частиц из компонентов бетонной смеси можно рассматривать как факт положительного влияния на итоговое качество бетона в возрасте 28 сут. Так, после промывки мелкого заполнителя бетонной смеси итоговая прочность бетона увеличилась на 3, 45 % по сравнению с прочностью образцов бетона, приготовленного без промывки минеральных компонентов. Испытания на 7-е сут набора прочности показали, что прочность образцов, изготовленных на основе мытых компонентов, на 1, 19 % выше, чем на основе немытых, и на 5, 65 % ниже в возрасте 14 сут.
The possibility of using alluvial sand deposits of the Volga and its tributaries (quartz fine-grained sands with modulus of elasticity of 0. 72-1. 23) as a component of heavy concrete as well as the degree of impact of sand muddiness on the strength gain of heavy concrete samples are considered. Studies have confirmed the possibility of using local river sand as fine filler for producing heavy concrete. Besides, it is established that the exclusion of silt particles from components of the concrete mix can be considered as the fact of the positive impact on the final quality of the concrete at the age of 28 days. So, after washing of fine-grained filler of concrete mix the final strength of concrete increased by 3. 45% comparing with the strength of concrete samples prepared without washing of mineral components. Tests on the 7th day of the strength gain showed that the strength of samples produced on the basis of washed components is higher by 1. 19% than on the basis of unwashed, and lower by 5. 65% at the age of 14 days.
The possibility of using alluvial sand deposits of the Volga and its tributaries (quartz fine-grained sands with modulus of elasticity of 0. 72-1. 23) as a component of heavy concrete as well as the degree of impact of sand muddiness on the strength gain of heavy concrete samples are considered. Studies have confirmed the possibility of using local river sand as fine filler for producing heavy concrete. Besides, it is established that the exclusion of silt particles from components of the concrete mix can be considered as the fact of the positive impact on the final quality of the concrete at the age of 28 days. So, after washing of fine-grained filler of concrete mix the final strength of concrete increased by 3. 45% comparing with the strength of concrete samples prepared without washing of mineral components. Tests on the 7th day of the strength gain showed that the strength of samples produced on the basis of washed components is higher by 1. 19% than on the basis of unwashed, and lower by 5. 65% at the age of 14 days.
Год издания: 2014
Авторы: Середин Б. Н. , Утегенов Б. Б. , Страхова Н. А. , Кортовенко Л. П.
Источник: Промышленное и гражданское строительство
Выпуск: № 6
Номера страниц: 17-19
Количество экземпляров:
- Абонемент научной литературы (пр. Свободный, 79, 4 этаж, холл): свободно 1 из 1 экземпляров
Ключевые слова: бетон, минеральные заполнители, песок, тяжелый бетон
Рубрики: Строительство,
Бетонные и железобетонные работы
Бетонные и железобетонные работы
ISSN: 0869-7019
Идентификаторы: шифр pigs/2014/6-208761