- Главная
- Ресурсы
- Библиотечный поиск
- Журнал «Физико-технические проблемы разработки полезных ископаемых»
- Выпуск 2018 г. № 3
Метод измерения основных параметров системы "уголь - метан" в горных выработкахстатья из журнала
База данных: Каталог библиотеки СФУ (С 440)
Библиографическое описание: Скокзилас, Н. . Метод измерения основных параметров системы "уголь - метан" в горных выработках / Н. Скокзилас, М. Вержбицкий, М. Кудащик. - (Новые методы и приборы в горном деле). - Текст : непосредственный // Физико-технические проблемы разработки полезных ископаемых. - 2018. - № 3. - С. 186-197 : ил. - Библиогр.: 28 назв. - ISSN 0015-3273.
Аннотация: Исследование посвящено опасности взрыва метана при добыче каменного угля. Подобная опасность возникает почти в каждом угольном бассейне мира. Обеспечение максимальной безопасности труда в условиях потенциальной угрозы основано на надежном, быстром и частом определении содержания метана в угольном пласте. Существующие методы требуют большого количества времени и должны реализовываться в лабораториях. Косвенные методы, такие как десорбометрический, характеризуются неточностью измерений. В данном исследовании представлена модель отвода метана из образцов гранулированного угля и устройство AMER, разработанное для натурных измерений содержания метана в угольном пласте in situ. Измерения выполняются в полностью автоматическом режиме, и предварительные результаты, полученные на основании аппроксимации модели Крэнка, доступны по истечению нескольких десятков минут от начала замеров. Результаты измерений, проведенных с помощью десорбометра AMER, согласуются с результатами, полученными в лаборатории традиционным методом.
The study is devoted to the methane hazard in hard coal mining. This hazard occurs in almost every coalfield in the world. Ensuring maximum work safety under methane hazard conditions is based, among other things, on reliable, fast and frequent determinations of methane content in a coal seam. The existing methods are time-consuming, and determinations must be performed in laboratories. Indirect methods such as desorbometric methods are burdened with high measurement uncertainties. The study presents a model of methane release from granular coal samples and a device (AMER) developed for measuring methane content in a coal seam under in situ conditions. Measurements are performed in a fully automatic way and preliminary results, based on the approximation of the Crank model, are available within several dozen minutes from the beginning of the measurement. Also, the use of the unipore diffusion equation and a proper software of the device allowed to determine the values of the effective diffusion coefficient. Results of measurements performed with the AMER desorbometer are highly consistent with the results of the measurements performed in the laboratory using a traditional method.
The study is devoted to the methane hazard in hard coal mining. This hazard occurs in almost every coalfield in the world. Ensuring maximum work safety under methane hazard conditions is based, among other things, on reliable, fast and frequent determinations of methane content in a coal seam. The existing methods are time-consuming, and determinations must be performed in laboratories. Indirect methods such as desorbometric methods are burdened with high measurement uncertainties. The study presents a model of methane release from granular coal samples and a device (AMER) developed for measuring methane content in a coal seam under in situ conditions. Measurements are performed in a fully automatic way and preliminary results, based on the approximation of the Crank model, are available within several dozen minutes from the beginning of the measurement. Also, the use of the unipore diffusion equation and a proper software of the device allowed to determine the values of the effective diffusion coefficient. Results of measurements performed with the AMER desorbometer are highly consistent with the results of the measurements performed in the laboratory using a traditional method.
Год издания: 2018
Авторы: Скокзилас Н. , Вержбицкий М. , Кудащик М.
Выпуск: № 3
Номера страниц: 186-197
Количество экземпляров:
- Читальный зал (пер. Вузовский, 6Д): свободно 1 из 1 экземпляров
Ключевые слова: сорбционные установки, метан, угольное производство, добыча, каменный уголь, безопасность труда, взрывы, потенциальная опасность, косвенные методы, десорбометрический метод, модель Крэнка, Крэнка модель, десорбометры, amer, горные выработки, методы измерения
Рубрики: Горное дело,
Маркшейдерское дело
Маркшейдерское дело
ISSN: 0015-3273
Идентификаторы: полочный индекс С 440, шифр phtp/2018/3-603892006