1. Главная
  2. Ресурсы
  3. Библиотечный поиск
Mechanical propertiesand failure criterionanalysis of Pt-Rhalloy sheets fortechnical purposes :научное издание Sidelnikov Sergey BorisovichBelyaev Sergey VladimirovichLopatina Ekaterina Sergeevna2025 год

Mechanical properties and failure criterion analysis of Pt-Rh alloy sheets for technical purposes : научное издание
статья из журнала

Дополнительные ссылки: eLibrary
База данных: Каталог библиотеки СФУ
Библиографическое описание: Mechanical properties and failure criterion analysis of Pt-Rh alloy sheets for technical purposes : научное издание / S. B. Sidelnikov [et al.]. - Текст : непосредственный // International Journal of Material Forming. - 2025. - Т. 18, № 3. - ISSN 1960-6206. - ISSN 1960-6214, DOI 10.1007/s12289-025-01925-4.
Аннотация: Research results for the production of strips from a platinum‒rhodium alloy for the manufacture of spinneret feeders are presented. Using the author's software, an analysis of the process of rolling strips of the investigated alloy with a thickness of 1 mm from a forged workpiece with a thickness of 28 mm, which is currently used in industrial conditions, was carried out. The number of rolling passes and the number of annealing steps decreased. Experiments for the process of cold sheet rolling of strips from the platinum‒rhodium alloy were carried out. The proposed compression mode was tested under industrial conditions, and it was found that for the studied process of cold sheet rolling of a platinum‒rhodium alloy, it is possible to increase the unit degree of deformation to 0.3–0.4 mm, which leads to a decrease in the fractional deformation, a decrease in the number of anneals and passes in the absence of strip destruction.
Год издания: 2025
Авторы: Sidelnikov Sergey Borisovich , Belyaev Sergey Vladimirovich , Lopatina Ekaterina Sergeevna , Lopatin Vladimir Alexandrovich , Konstantinov Igor Lazarevich , Lezhnev Sergey Nikolaevich , Baykovskiy Yuriy Viktorovich , Novikova Olga Sergeevna , Galiev Roman Ilsurovich , Belokonova Irina Nikolaevna , Voroshilova Marina Vladimirovna
Источник: International Journal of Material Forming
Выпуск: Т. 18, № 3
Держатель оригинала документа: Rudny Industrial Institute, Siberian federal university
Количество экземпляров:
Твёрдая копия издания отсутствует в фонде библиотеки

Похожие публикации

Development andresearch oftechnology forobtaining andproperties of weldingwire from Al-Mg-Scalloys using… Sidelnikov Sergey BorisovichVoroshilov Denis SergeevichLopatina Ekaterina Sergeevna2024 год

Development and research of technology for obtaining and properties of welding wire from Al-Mg-Sc… : научное издание

  • Sidelnikov Sergey Borisovich и др.
  • 2024 год
Evaluation theinfluence of combinedthermal-deformationtreatment parameterson the physical andmechanical… Bespalov Vadim MikhaylovichSidelnikov Sergey BorisovichBerngardt ViktorAleksandrovich2025 год

Evaluation the influence of combined thermal-deformation treatment parameters on the physical and… : научное издание

  • Bespalov Vadim Mikhaylovich и др.
  • 2025 год
Influence of steppedannealing on theproperties ofconductor wire afteringotlessrolling-extrusion anddrawing of… Bespalov VadimVoroshilov DenisSidelnikov Sergey2023 год

Influence of stepped annealing on the properties of conductor wire after ingotless rolling… : научное издание

  • Bespalov Vadim и др.
  • 2023 год
STUDY ON THEINFLUENCE OF HEATTREATMENT MODES ONMECHANICAL ANDCORROSION PROPERTIESOF ROLLED SHEETPRODUCTS FROM A… Baranov V.N.Sidelnikov S.B.Zenkin E.Yu.2019 год

STUDY ON THE INFLUENCE OF HEAT TREATMENT MODES ON MECHANICAL AND CORROSION PROPERTIES OF ROLLED… : научное издание

  • Baranov V.N. и др.
  • 2019 год
Analysis ofproperties anddeformation flowduring production ofthin-walled sphericalparts from aluminumalloy 1580 Sidelnikov Sergey BorisovichBer Vladimir IvanovichLopatina Ekaterina Sergeevna2025 год

Analysis of properties and deformation flow during production of thin-walled spherical parts from… : научное издание

  • Sidelnikov Sergey Borisovich и др.
  • 2025 год
Modeling andinvestigation ofcombined processes ofcasting, rolling, andextrusion to produceelectrical wire from… Sidelnikov Sergey BorisovichBespalov Vadim MikhaylovichVoroshilov Denis Sergeevich2024 год

Modeling and investigation of combined processes of casting, rolling, and extrusion to produce… : научное издание

  • Sidelnikov Sergey Borisovich и др.
  • 2024 год
Study the influenceof scandium contentand annealing regimeson the properties ofalloys 1580 and 1581 Konstantinov I.L.Yuryev P.O.Baranov V.N.2023 год

Study the influence of scandium content and annealing regimes on the properties of alloys 1580 and… : научное издание

  • Konstantinov I.L. и др.
  • 2023 год
Investigation ofvarious processattributes in aningotlessrolling-extrusionprocess imposed onwaste aluminum alloy… Sidelnikov Sergey BorisovichLopatina Ekaterina SergeevnaParubok Andrey Vasilyevich2024 год

Investigation of various process attributes in an ingotless rolling-extrusion process imposed on… : научное издание

  • Sidelnikov Sergey Borisovich и др.
  • 2024 год

Показать ещё

Pilot-scaleindustrial researchinto the modifyingcapacity of rods madefrom secondary AD31alloy waste obtained… Sidelnikov S.B.Lopatina E.S.Parubok A.V.2025 год

Pilot-scale industrial research into the modifying capacity of rods made from secondary AD31 alloy… : научное издание

  • Sidelnikov S.B. и др.
  • 2025 год
Study ofdeformability duringthe rolling ofaluminum alloy 1580doped with smalladditions of erbiumand ytterbium Konstantinov Igor L.Baykovskiy Yuriy V.Yuryev Pavel O.2025 год

Study of deformability during the rolling of aluminum alloy 1580 doped with small additions of… : научное издание

  • Konstantinov Igor L. и др.
  • 2025 год
Study of theinfluence ofconditions ofcombined casting androlling-extruding andtwo-stage annealingon the… Bespalov V.Sidelnikov S.Voroshilov D.2019 год

Study of the influence of conditions of combined casting and rolling-extruding and two-stage… : научное издание

  • Bespalov V. и др.
  • 2019 год
Combinedrolling‑extrusion ofvarious billets fromthe Al–Ce–La alloyfor electrical wireproduction Voroshilov Denis SergeevichSidelnikov Sergey BorisovichBespalov Vadim Mikhaylovich2024 год

Combined rolling‑extrusion of various billets from the Al–Ce–La alloy for electrical wire production : научное издание

  • Voroshilov Denis Sergeevich и др.
  • 2024 год
Study of structureand properties ofindustrial ingot madeof alloy 1580 anddetermination of itsdeformability… Konstantinov I.L.Yuryev P.O.Baykovskiy Yu. V.2025 год

Study of structure and properties of industrial ingot made of alloy 1580 and determination of its… : научное издание

  • Konstantinov I.L. и др.
  • 2025 год
Characterizationproperties andstructure for wiresfrom Al-Ce-La systemalloy via the methodof combined rolling… Voroshilov Denis S.2025 год

Characterization properties and structure for wires from Al-Ce-La system alloy via the method of… : научное издание

  • Voroshilov Denis S.
  • 2025 год
Investigation thestructure in cast anddeformed states ofaluminum alloy,economically alloyedwith scandium and… Yuryev Pavel OlegovichBaranov Vladimir NikolaevichOrelkina Tamara Aleksandrovna2021 год

Investigation the structure in cast and deformed states of aluminum alloy, economically alloyed… : научное издание

  • Yuryev Pavel Olegovich и др.
  • 2021 год
Study on thestructure andproperties of stripsand plates from thealloy of the Al-mgsystem, economicallyalloyed… Baranov V.N.Sidelnikov S.B.Zenkin E.Y.2020 год

Study on the structure and properties of strips and plates from the alloy of the Al-mg system,… : научное издание

  • Baranov V.N. и др.
  • 2020 год