1. Главная
  2. Ресурсы
  3. Библиотечный поиск
Study on thestructure andproperties of stripsand plates from thealloy of the Al-mgsystem, economicallyalloyed withscandium… : научноеиздание Baranov V.N.Sidelnikov S.B.Zenkin E.Y.2020 год

Study on the structure and properties of strips and plates from the alloy of the Al-mg system, economically alloyed with scandium : научное издание
статья из журнала

Дополнительные ссылки: eLibrary
База данных: Каталог библиотеки СФУ
Библиографическое описание: Study on the structure and properties of strips and plates from the alloy of the Al-mg system, economically alloyed with scandium : научное издание / V. N. Baranov [et al.]. - Текст : непосредственный // Journal of Chemical Technology and Metallurgy. - 2020. - Т. 55, № 3. - P. 538-543. - ISSN 1314-7471. - ISSN 1314-7978.
Аннотация: In this work the structure and properties of deformed semi-finished products from an alloy of the Al-Mg system, economically alloyed with scandium, were studied. For conducting experimental studies during sheet rolling, the DUO 330 laboratory mill with a roll barrel length of 520 mm was used. An alloy of aluminum with magnesium alloyed with scandium and zirconium was chosen as an experimental one. For hot and cold rolling of ingots with a thickness of 28 and 60 mm, the deformation modes developed earlier were used, and a research methodology was compiled. It consisted of the following stages: preparation of ingots from the experimental alloy for rolling, including milling of faces of flat ingots and their homogenization; hot rolling of strips to a thickness of 10 mm; cold rolling of strips to a thickness of 1 and 3 mm, as well as plates to a thickness of 31.5 mm; annealing of cold-formed semi-finished products; assessment of the structure and properties of cast, deformed and annealed semi-finished products at all stages of research. The study of the structure and properties of the obtained semi-finished products showed that when implementing the developed technological regimes during rolling and heat treatment, it is possible to obtain the required level of plastic and strength characteristics comparable to the level of properties of industrial alloy 01570.
Год издания: 2020
Авторы: Baranov V.N. , Sidelnikov S.B. , Zenkin E.Y. , Belokonova I.N. , Lopatina E.S. , Yakivyuk O.V. , Voroshilov D.S.
Источник: Journal of Chemical Technology and Metallurgy
Выпуск: Т. 55, № 3
Номера страниц: 538-543
Держатель оригинала документа: RUSAL Bratsk Aluminum Smelter, Siberian Federal University
Количество экземпляров:
Твёрдая копия издания отсутствует в фонде библиотеки

Похожие публикации

Investigation thestructure in cast anddeformed states ofaluminum alloy,economically alloyedwith scandium and… Yuryev Pavel OlegovichBaranov Vladimir NikolaevichOrelkina Tamara Aleksandrovna2021 год

Investigation the structure in cast and deformed states of aluminum alloy, economically alloyed… : научное издание

  • Yuryev Pavel Olegovich и др.
  • 2021 год
Investigation of thestructure andproperties ofcold-rolled stripsfrom experimentalalloy 1580 with areduced… Konstantinov I.L.Baranov V.N.Sidelnikov S.B.2020 год

Investigation of the structure and properties of cold-rolled strips from experimental alloy 1580… : научное издание

  • Konstantinov I.L. и др.
  • 2020 год
Simulation of processrolling plates fromalloy of al-mg systemeconomically dopedwith scandium Sidelnikov S.Dovzhenko I.Belokonova I.2021 год

Simulation of process rolling plates from alloy of al-mg system economically doped with scandium : научное издание

  • Sidelnikov S. и др.
  • 2021 год
Investigation ofrolling modes,structure, andproperties ofaluminum-magnesiumalloy plates with areduced scandium… Sidelnikov S.B.Baranov V.N.Konstantinov I.L.2022 год

Investigation of rolling modes, structure, and properties of aluminum-magnesium alloy plates with… : статья из журнала

  • Sidelnikov S.B. и др.
  • 2022 год
Investigation thestructure andproperties ofdeformedsemi-finishedproducts producedfrom chips of Al–Mgalloys… Sidelnikov S.B.Zagirov N.N.Loginov Y.N.2023 год

Investigation the structure and properties of deformed semi-finished products produced from chips… : статья из журнала

  • Sidelnikov S.B. и др.
  • 2023 год
The research of thecold rolling modesfor plates ofaluminum alloysparingly doped withscandium Baranov V.N.Zenkin E.YuKonstantinov I.L.2019 год

The research of the cold rolling modes for plates of aluminum alloy sparingly doped with scandium : научное издание

  • Baranov V.N. и др.
  • 2019 год
Study the influenceof scandium contentand annealing regimeson the properties ofalloys 1580 and 1581 Konstantinov I.L.Yuryev P.O.Baranov V.N.2023 год

Study the influence of scandium content and annealing regimes on the properties of alloys 1580… : статья из журнала

  • Konstantinov I.L. и др.
  • 2023 год
Study the influenceof scandium contentand annealing regimeson the properties ofalloys 1580 and 1581 Konstantinov I.L.Yuryev P.O.Baranov V.N.2023 год

Study the influence of scandium content and annealing regimes on the properties of alloys 1580 and… : научное издание

  • Konstantinov I.L. и др.
  • 2023 год

Показать ещё

Production oflow-scandium al – mgalloys Baranov V.N.Kulikov B.P.Yuriev P.O.2021 год

Production of low-scandium al – mg alloys : статья из журнала

  • Baranov V.N. и др.
  • 2021 год
Development andresearch oftechnology forobtaining andproperties of weldingwire from Al-Mg-Scalloys using… Sidelnikov Sergey BorisovichVoroshilov Denis SergeevichLopatina Ekaterina Sergeevna2024 год

Development and research of technology for obtaining and properties of welding wire from Al-Mg-Sc… : научное издание

  • Sidelnikov Sergey Borisovich и др.
  • 2024 год
The research of thecold rolling modesfor plates ofaluminum alloysparingly doped withscandium Baranov V. N.Zenkin E. Yu.Konstantinov I. L.2019 год

The research of the cold rolling modes for plates of aluminum alloy sparingly doped with scandium : научное издание

  • Baranov V. N. и др.
  • 2019 год
STUDY ON THEINFLUENCE OF HEATTREATMENT MODES ONMECHANICAL ANDCORROSION PROPERTIESOF ROLLED SHEETPRODUCTS FROM A… Baranov V.N.Sidelnikov S.B.Zenkin E.Yu.2019 год

STUDY ON THE INFLUENCE OF HEAT TREATMENT MODES ON MECHANICAL AND CORROSION PROPERTIES OF ROLLED… : научное издание

  • Baranov V.N. и др.
  • 2019 год
ExperimentalInvestigations on theProduction ofAlloying Rods fromRecycled Waste ofAluminum Alloys at aCo… Sidelnikov Sergey BorisovichLoginov Yuri NikolaevichIvanov Evgeniy Vladimirovich2025 год

Experimental Investigations on the Production of Alloying Rods from Recycled Waste of Aluminum… : научное издание

  • Sidelnikov Sergey Borisovich и др.
  • 2025 год
Study ofdeformability duringthe rolling ofaluminum alloy 1580doped with smalladditions of erbiumand ytterbium Konstantinov Igor L.Baykovskiy Yuriy V.Yuryev Pavel O.2025 год

Study of deformability during the rolling of aluminum alloy 1580 doped with small additions of… : научное издание

  • Konstantinov Igor L. и др.
  • 2025 год
Mechanical propertiesand microstructure ofmulti-pass butt weldof plates made ofAl-Mg-Zr alloysparingly doped… Dovzhenko N.N.Demchenko A.I.Bezrukikh A.A.2021 год

Mechanical properties and microstructure of multi-pass butt weld of plates made of Al-Mg-Zr alloy… : научное издание

  • Dovzhenko N.N. и др.
  • 2021 год
Analysis ofproperties anddeformation flowduring production ofthin-walled sphericalparts from aluminumalloy 1580 Sidelnikov Sergey BorisovichBer Vladimir IvanovichLopatina Ekaterina Sergeevna2025 год

Analysis of properties and deformation flow during production of thin-walled spherical parts from… : научное издание

  • Sidelnikov Sergey Borisovich и др.
  • 2025 год