A Comparative Analysis of Technologies for Producing Al–3Ti–1B Modifying Master Alloy : научное издание

Stepanenko N.A.; Kulikov B.P.; Kosovich A.A.; Belyaev S.V.; Konstantinov I.L.; Partyko E.G.; Yuriev P.O.

Дополнительные ссылки: eLibrary

База данных: Каталог библиотеки СФУ

Библиографическое описание: A Comparative Analysis of Technologies for Producing Al–3Ti–1B Modifying Master Alloy : научное издание / N. A. Stepanenko [et al.]. - Текст : непосредственный // Metallurgist. - 2023. - Т.67, №7-8. - P. 1166-1177. - ISSN 0026-0894. - ISSN 1573-8892, DOI 10.1007/s11015-023-01608-y.

Аннотация: Al–3Ti–1B and Al–5Ti–1B master alloys represent the most popular modifiers for the majority of aluminum alloy groups. To date, several methods, requiring various conditions and resource costs, have been applied for producing these master alloys. The paper presents the results of a comparative analysis of methods for producing Al–3Ti–1B master alloy using both a Ti sponge and salts (K2TiF6 and KBF4) as the starting components. The degree of Ti and B recovery for three methods of the master alloy production was experimentally established. The phase and element compositions of slags were studied; the amount of fluorine gas, emitted during the master alloy production, was calculated. A method, using a titanium sponge and molten KBF4 + KCl mixture, was identified to ensure a recovery of Ti and B equal to 88.10 and 72.20%, respectively. The modifying ability of the produced master alloys was studied both according to the TP-1 method and using the laboratory and industrial unit of semi-continuous casting.??

Год издания: 2023

Авторы: Stepanenko N.A. , Kulikov B.P. , Kosovich A.A. , Belyaev S.V. , Konstantinov I.L. , Partyko E.G. , Yuriev P.O.

Издательство: Springer New York Consultants Bureau, Москва

Источник: Metallurgist

Выпуск: Т.67, №7-8

Номера страниц: 1166-1177

Держатель оригинала документа: Siberian Federal University

Количество экземпляров:

Твёрдая копия издания отсутствует в фонде библиотеки

Показать дополнительные сведения

Statistical analysis of parameters of the process analysis of grain refinement of the aluminum cast… : научное издание

Kosovich A. A. и др.
2025 год

Comparative study of Al - 5Ti - 1B and Al - 3La - 1.5B modifying ligatures : научное издание

Partyko E. G. и др.
2024 год

СРАВНИТЕЛЬНЫЙ АНАЛИЗ ТЕХНОЛОГИЙ ПОЛУЧЕНИЯ МОДИФИЦИРУЮЩЕЙ ЛИГАТУРЫ Al-3Ti-1B : научное издание

Степаненко Никита Андреевич и др.
2023 год

Composite Coaxial Wire Produced from Electromagnetically Cast Al–Fe Alloys : статья из журнала

Medvedev A. E. и др.
2024 год

Technology for the producing calibrated bars made of aluminum alloy 6082 prepared using ingotless… : научное издание

Sidelnikov S. B. и др.
2023 год

Modeling and investigation of combined processes of casting, rolling, and extrusion to produce… : научное издание

Sidelnikov Sergey Borisovich и др.
2024 год

The Influence of Production Technology and Subsequent Deformation Treatment on the Microstructure… : научное издание

Medvedev A. E. и др.
2026 год

Development and research of technology for obtaining and properties of welding wire from Al-Mg-Sc… : научное издание

Sidelnikov Sergey Borisovich и др.
2024 год

Investigation the structure and properties of deformed semi-finished products produced from chips… : статья из журнала

Sidelnikov S.B. и др.
2023 год

Developing Technology of Obtaining wire from High Alloyed Alloys AL-REM System Using the Methods… : статья из журнала

Voroshilov D. S. и др.
2015 год

Analysis of dissolved titanium concentration and phase transformation in molten Al[sbnd]Ti alloy… : статья из журнала

Leosson K. и др.
2022 год

Analysis of energy-force parameters of combined processing for receiving modifying bars from Al - 5… : научное издание

Sidelnikov S.B. и др.
2017 год

Thermal analysis of al-5ti1-1b ligature : доклад, тезисы доклада, статья из сборника материалов конференций

Cherepanov A.I. и др.
2021 год

Analysis of the comparative efficiency of wind turbines based on the basic and modified DEA model : доклад, тезисы…

Kovalev I.V. и др.
2022 год

Technology for Modifying Aluminum Alloys with Ultrafine Silicon : сборник научных трудов

Illarionov I.E. и др.
2018 год

The Effect of Thermodeformation Treatment on the Structure and Strengthening of the Al–7.1% Zn–2.8%… : научное издание

Belov N. A. и др.
2023 год

Библиотечно-издательский комплекс СФУ

A Comparative Analysis of Technologies for Producing Al–3Ti–1B Modifying Master Alloy : научное издание
статья из журнала

Похожие публикации