1. Главная
  2. Ресурсы
  3. Библиотечный поиск
Investigationstructure andproperties of wirefrom the alloy ofAL-REM systemobtained with theapplication ofcasting in the… :научное издание Sidelnikov S.B.Voroshilov D.S.Motkov M.M.2021 год

Investigation structure and properties of wire from the alloy of AL-REM system obtained with the application of casting in the electromagnetic mold, combined rolling-extruding, and drawing : научное издание
статья из журнала

Дополнительные ссылки: eLibrary
База данных: Каталог библиотеки СФУ
Библиографическое описание: Investigation structure and properties of wire from the alloy of AL-REM system obtained with the application of casting in the electromagnetic mold, combined rolling-extruding, and drawing : научное издание / S. B. Sidelnikov [et al.]. - Текст : непосредственный // The International Journal of Advanced Manufacturing Technology. - 2021. - № . - ISSN 0268-3768. - ISSN 1433-3015, DOI 10.1007/s00170-021-07054-x.
Аннотация: The paper presents the results of studies of the structure and properties of a wire with a diameter of 0.5 mm from an alloy of the Al-REM system with a rare-earth metal content of 7–9%. Wire obtained as a result of the implementation of the technology of its manufacture using the methods of casting into an electromagnetic mold (EMM), continuous extruding, and drawing. The rheological properties of the metal of continuously cast round billets from the experimental alloy obtained using an electromagnetic mold are determined. The modeling and analytical assessment of the possibility of carrying out the process of combined rolling-extruding (CRE) of such billets in a closed box-type roll groove of a continuous extruding unit are carried out. The features of metal shaping have been studied. The temperature-speed and technological parameters were found at which the CRE process can be carried out in a stable mode of operation. Data have been obtained for the forces acting on the die and rolls during rolling-extruding. The results of experimental studies of the process of obtaining longish deformed semi-finished products from an experimental alloy on the laboratory unit CRE-200 and the pilot plant unit CRE-400 are presented. The structure of the metal has been studied; data on the ultimate tensile strength, yield strength, relative elongation, and electrical resistance of hot-extruded rods and wires in cold-worked and annealed states have been obtained. It was found that the proposed processing modes make it possible to obtain by the method of combined rolling-extruding rods with a diameter of 9 mm in industrial conditions from longish billets with a diameter of 18 mm, cast by means of EMM. Wire in a cold-deformed and annealed state with a diameter of 0.5 obtained by drawing from the rods with a diameter of 9 mm from an experimental alloy of the Al-REM system containing 7–9% rare-earth metals with the required physical and mechanical properties.
Год издания: 2021
Авторы: Sidelnikov S.B. , Voroshilov D.S. , Motkov M.M. , Timofeev V.N. , Konstantinov I.L. , Dovzhenko N.N. , Lopatina E.S. , Bespalov V.M. , Sokolov R.E. , Voroshilova M.V. , Mansurov Y.N.
Издательство: Springer-Verlag London Ltd
Источник: The International Journal of Advanced Manufacturing Technology
Держатель оригинала документа: Institute of General and Inorganic Chemistry of the Academy of Sciences of the Republic of Uzbekistan,Tashkent State Transport University, LLC «Research and Production Center of Magnetic Hydrodynamics», Siberian Federal University
Количество экземпляров:
Твёрдая копия издания отсутствует в фонде библиотеки

Похожие публикации

Obtaining Al–Zr-Hfwire usingelectromagneticcasting, combinedrolling-extrusion,and drawing Voroshilov D.S.Motkov M.M.Sidelnikov S.B.2022 год

Obtaining Al–Zr-Hf wire using electromagnetic casting, combined rolling-extrusion, and drawing : статья из журнала

  • Voroshilov D.S. и др.
  • 2022 год
Modeling and study ofthe technology forobtaining solder wirefrom new silver-basedalloys withoutcadmium Sidelnikov S.B.Vinogradov O.O.Lopatina E.S.2022 год

Modeling and study of the technology for obtaining solder wire from new silver-based alloys… : статья из журнала

  • Sidelnikov S.B. и др.
  • 2022 год
Understanding theeffect produced bycombined processingand drawing on thestructure andproperties ofconductive… Bespalov V.M.Sidelnikov S.B.Belokopytov V.I.2020 год

Understanding the effect produced by combined processing and drawing on the structure and… : статья из журнала

  • Bespalov V.M. и др.
  • 2020 год
Investigation modesfor productiontechnology of wirefrom the Pd5Ni alloyfor catchment gauzesof the chemicalindustry Konstantinov I.L.Sidelnikov S. B.Lopatina E.S.2022 год

Investigation modes for production technology of wire from the Pd5Ni alloy for catchment gauzes of… : научное издание

  • Konstantinov I.L. и др.
  • 2022 год
Modeling andinvestigation ofcombined processes ofcasting, rolling, andextrusion to produceelectrical wire from… Sidelnikov Sergey BorisovichBespalov Vadim MikhaylovichVoroshilov Denis Sergeevich2024 год

Modeling and investigation of combined processes of casting, rolling, and extrusion to produce… : научное издание

  • Sidelnikov Sergey Borisovich и др.
  • 2024 год
Combinedrolling‑extrusion ofvarious billets fromthe Al–Ce–La alloyfor electrical wireproduction Voroshilov Denis SergeevichSidelnikov Sergey BorisovichBespalov Vadim Mikhaylovich2024 год

Combined rolling‑extrusion of various billets from the Al–Ce–La alloy for electrical wire production : научное издание

  • Voroshilov Denis Sergeevich и др.
  • 2024 год
Comparative analysisof properties ofwires from alloys ofal-rem system,obtained using themethods ofcontinuous… Sidelnikov S.B.Timofeev V.N.Gorokhov Y.V.2019 год

Comparative analysis of properties of wires from alloys of al-rem system, obtained using the… : статья из журнала

  • Sidelnikov S.B. и др.
  • 2019 год
Development andresearch oftechnology forproducingelectrotechnical wirefrom alloys of theal-rem system,obtained… Sidelnikov S.B.Voroshilov D.S.Pervukhin M.V.2019 год

Development and research of technology for producing electrotechnical wire from alloys of the al… : статья из журнала

  • Sidelnikov S.B. и др.
  • 2019 год

Показать ещё

Infuence of theParameters ofCombined Processingand Drawing on theStructure andProperties ofConductor Semi… Bespalov V.M.Voroshilov D.S.Berngardt V.A.2023 год

Infuence of the Parameters of Combined Processing and Drawing on the Structure and Properties of… : научное издание

  • Bespalov V.M. и др.
  • 2023 год
Structure andProperties of Ca andZr Containing HeatResistant WireAluminum AlloyManufactured byElectromagnetic… Belov NikolayAkopyan TorgomKorotkova Natalia2021 год

Structure and Properties of Ca and Zr Containing Heat Resistant Wire Aluminum Alloy Manufactured by… : научное издание

  • Belov Nikolay и др.
  • 2021 год
Experimental andanalytical assessmentof the powerparameters of thecombinedrolling-extrudingprocess using a… Sidelnikov S.Voroshilov D.Motkov M.2021 год

Experimental and analytical assessment of the power parameters of the combined rolling-extruding process using a…

  • Sidelnikov S. и др.
  • 2021 год
Investigation thestructure andproperties ofdeformedsemi-finishedproducts producedfrom chips of Al–Mgalloys… Sidelnikov S.B.Zagirov N.N.Loginov Y.N.2023 год

Investigation the structure and properties of deformed semi-finished products produced from chips… : статья из журнала

  • Sidelnikov S.B. и др.
  • 2023 год
Study of themanufacturability ofproduction andproperties of weldingwire from alloy 1580 Sidelnikov S.Baranov V.Dovzhenko N.2020 год

Study of the manufacturability of production and properties of welding wire from alloy 1580 : доклад, тезисы доклада,…

  • Sidelnikov S. и др.
  • 2020 год
Study the influenceof scandium contentand annealing regimeson the properties ofalloys 1580 and 1581 Konstantinov I.L.Yuryev P.O.Baranov V.N.2023 год

Study the influence of scandium content and annealing regimes on the properties of alloys 1580… : статья из журнала

  • Konstantinov I.L. и др.
  • 2023 год
Study the influenceof scandium contentand annealing regimeson the properties ofalloys 1580 and 1581 Konstantinov I.L.Yuryev P.O.Baranov V.N.2023 год

Study the influence of scandium content and annealing regimes on the properties of alloys 1580 and… : научное издание

  • Konstantinov I.L. и др.
  • 2023 год
Developing Technologyof Obtaining wirefrom High AlloyedAlloys Al-REM SystemUsing the Methods ofCombined Treatment Voroshilov Denis S.Sidelnikov Sergey B.Rudnitsky Edward A.2015 год

Developing Technology of Obtaining wire from High Alloyed Alloys Al-REM System Using the Methods… : статья из журнала

  • Voroshilov Denis S. и др.
  • 2015 год