The model of energy distribution during electron beam input in welding process : доклад, тезисы доклада

Kurashkin S.O.; Tynchenko V.S.; Seregin Y.N.; Murygin A.V.; Kukartsev V.V.; Tynchenko V.V.

Дополнительные ссылки: eLibrary · Источник статьи

База данных: Каталог библиотеки СФУ

Библиографическое описание: The model of energy distribution during electron beam input in welding process : доклад, тезисы доклада / S. O. Kurashkin [et al.]. - [S. l. : s. n.], 2020. - Текст : непосредственный // Journal of Physics: Conference Series / Krasnoyarsk Science and Technology City Hall of the Russian Union of Scientific and Engineering Associations ; II International Scientific Conference on Applied Physics, Information Technologies and Engineering (2020 ; 25.09 - 04.10 ; Krasnoyarsk, Russian Federation). - Krasnoyarsk, Russian Federation : Institute of Physics and IOP Publishing Limited, 2020. - 1679. - P. 42036. - DOI 10.1088/1742-6596/1679/3/042036.

Аннотация: Modeling is one of the most important parts of applied research, the processes for which carrying out full-scale experiments is either expensive or highly labor-intensive. The article deals with the problem of modeling the energy distribution at the stage of electron beam input during welding. The solution to this problem will allow not only to reduce the cost of testing the technological parameters of electron beam welding of products with new geometry or from new materials, but also to support the decision-making of the technologist when optimizing the manufacturing process of existing products. Based on the theory of thermal processes, mathematical models have been developed that consider the characteristics of the materials to be welded and the technological parameters of the electron-beam welding process. In the course of experimental studies, the energy distribution was simulated when the electron beam was introduced for structures made of two different materials with different geometries. The obtained models for calculating the temperature at the input section not only supplement the complex of existing mathematical models of the electron beam welding process, but also allow expanding their application for calculating and optimizing the welding process, taking into account the excess temperature at the electron beam input section. In the future, this will allow considering the temperature spread at the input stage and obtaining a more stable quality of the welded seam with fewer root defects.

Год издания: 2020

Авторы: Kurashkin S.O. , Tynchenko V.S. , Seregin Y.N. , Murygin A.V. , Kukartsev V.V. , Tynchenko V.V.

Издательство: Institute of Physics and IOP Publishing Limited, Krasnoyarsk, Russian Federation

Источник: Journal of Physics: Conference Series

Выпуск: 1679

Мероприятие: II International Scientific Conference on Applied Physics, Information Technologies and Engineering (Krasnoyarsk, Russian Federation, 2020 ; 25.09 - 04.10)

Номера страниц: 42036

Держатель оригинала документа: Reshetnev Siberian State University of Science and Technology, Siberian Federal University

Количество экземпляров:

Твёрдая копия издания отсутствует в фонде библиотеки

Показать дополнительные сведения

The model of energy distribution during electron beam input in welding process : доклад, тезисы доклада, статья из…

Tynchenko V.S. и др.
2020 год

Algorithm for calculating the distribution of temperature fields at the stage of input and output of an electron beam…

Tynchenko V.S. и др.
2020 год

Energy distribution modelling in the weld zone for various electron beam current values in… : доклад, тезисы доклада

Tynchenko V.S. и др.
2021 год

The use of ANSYS for modelling the energy distribution in steady mode with electron beam… : доклад, тезисы доклада

Murygin A.V. и др.
2021 год

Energy Distribution Modeling During the Electron Beam Welding Using Dynamically Changing Thermophysical Parameters of…

Kurashkin S. и др.
2021 год

Mathematical functional for thermal distribution calculating during the electron-beam… : доклад, тезисы доклада

Kurashkin S.O. и др.
2020 год

Software System for Modeling Temperature Distribution During the Electron Beam Welding : доклад, тезисы доклада,…

Rogova D. и др.
2022 год

The concept of an electron beam I/O control system to optimize the weld formation in the process of electron beam…

Tynchenko V.S. и др.
2019 год

Modeling the Temperature Field Distribution at the Stages of Input-Output of the Electron Beam : доклад, тезисы…

Kurashkin S. и др.
2021 год

Mathematical models of beam input and output in the process of electron beam welding of thin… : доклад, тезисы доклада

Kurashkin S.O. и др.
2020 год

Automation of Electron Beam Input During the Welding of Thin-Walled Structures : доклад, тезисы доклада, статья из…

Tynchenko V. и др.
2021 год

Approaches review and tools analysis for thermal processes modeling in electron beam welding : доклад, тезисы доклада

Milov A.V. и др.
2020 год

Simulation of the electron beam welding process of a bimetallic ring by means of ANSYS : доклад, тезисы доклада,…

Kurashkin S.O. и др.
2021 год

Modeling of Product Heating at the Stage of Beam Input in the Process of Electron Beam Welding Using the COMSOL…

Kurashkin S. и др.
2020 год

Temperature spread modeling of electron beam heating process : доклад, тезисы доклада, статья из сборника материалов…

Oreshenko T.G. и др.
2019 год

Modeling the Temperature Distribution in an Electron Beam Welded Bimetallic Ring with COMSOL… : доклад, тезисы доклада

Kurashkin S.O. и др.
2022 год

Библиотечно-издательский комплекс СФУ

The model of energy distribution during electron beam input in welding process : доклад, тезисы доклада
доклад, тезисы доклада, статья из сборника материалов конференций

Похожие публикации