Skip to main content

Advertisement

Springer Nature Link
Log in

Advanced manufacturing systems: socialization characteristics and trends

  • Published:
Journal of Intelligent Manufacturing Aims and scope Submit manuscript

Abstract

Since 1960s, with the development of societal and related technologies, many advanced manufacturing systems (AMSs) and modes have been put forward, and they have attracted the attention of a large number of researchers in manufacturing, information and management fields. However, existing studies are mainly focused on the specific theoretical research of each AMS, and the horizontal comparison of the difference and evolution of these AMSs are not significant. Furthermore, most of the existing studies try to realize concrete technical implementation, and discussions on the relationship among these AMSs and social factors are relatively rare. Therefore, this paper aims to address this issue, and a brief overview of the development process of AMSs is first presented. Next, a tri-view model is established to analyze the evolution and socialization characteristics of AMSs. It is found that the sharing of manufacturing resources and capabilities, the value creation carriers, the value measuring criteria, the composition of the value chain and enterprise collaboration, and the user participation in manufacturing are all moving towards socialization. It is essential that the evolution and development of AMSs should also adapt this trend towards socialization in order to achieve better sharing of limited resources and efficient adding of value.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  • Agarwal, A., Shankar, R., & Tiwari, M. K. (2006). Modeling the metrics of lean, agile and leagile supply chain: An ANP-based approach. European Journal of Operational Research, 173(1), 211–225.

    Article  Google Scholar 

  • Alghalith, M. (2008). Recent applications of theory of the firm under uncertainty. European Journal of Operational Research, 186(2), 443–450.

    Article  Google Scholar 

  • Atzori, L., Iera, A., & Morabito, G. (2010). The internet of things: A survey. Computer Networks, 54(15), 2787–2805.

    Article  Google Scholar 

  • Baines, T. S., Lightfoot, H. W., Benedettini, O., & Kay, J. M. (2009). The servitization of manufacturing: A review of literature and reflection on future challenges. Journal of Manufacturing Technology Management, 20(5), 547–567.

    Article  Google Scholar 

  • Banerjee, P., Bash, C., Friedrich, R., Goldsack, P., Huberman, B. A., Manley, J., et al. (2011). Everything as a Service: Powering the New Information Economy. Computer, 44(3), 36–43.

    Article  Google Scholar 

  • Baum, H., & Schutze, J. (2012). A model of collaborative enterprise networks. 45th CIRP Conference on Manufacturing Systems, 3, 549–554.

    Google Scholar 

  • Bi, Z. M., Lin, Y., & Zhang, W. J. (2010). The general architecture of adaptive robotic systems for manufacturing applications. Robotics and Computer-Integrated Manufacturing, 26(5), 461–470.

    Article  Google Scholar 

  • Bremer, C. F., & Eversheim, W. (2000). From an opportunity identification to its manufacturing: A references model for virtual manufacturing. CIRP Annals-Manufacturing Technology, 49(1), 325–329.

    Article  Google Scholar 

  • Camarinha-Matos, L. M. (2009). Collaborative networked organizations: Status and trends in manufacturing. Annual Reviews in Control, 33(2), 199–208.

    Article  Google Scholar 

  • Camarinha-Matos, L. M., Afsarmanesh, H., Galeano, N., & Molina, A. (2009). Collaborative networked organizations—Concepts and practice in manufacturing enterprises. Computers & Industrial Engineering, 57(1SI), 46–60.

    Article  Google Scholar 

  • Chan, F. (2001). The effects of routing flexibility on a flexible manufacturing system. International Journal of Computer Integrated Manufacturing, 14(5), 431–445.

    Article  Google Scholar 

  • Chan, F., Chaube, A., Mohan, V., Arora, V., & Tiwari, M. K. (2010). Operation allocation in automated manufacturing system using GA-based approach with multifidelity models. Robotics and Computer-Integrated Manufacturing, 26(5), 526–534.

    Article  Google Scholar 

  • Chen, F. F., & Wang, Y. C. (2013). Preface. Robotics and Computer-Integrated Manufacturing, 29(3SI), 1–2.

  • Cheng, Y., Tao, F., Liu, Y. L., Zhao, D., Zhang, L., & Xu, L. D. (2013). Energy-aware resource service scheduling based on utility evaluation in cloud manufacturing system. Proceedings of The Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 227(12), 1901–1915.

    Article  Google Scholar 

  • Chien, C. F., Gen, M., Shi, Y. J., & Hsu, C. Y. (2014). Manufacturing intelligence and innovation for digital manufacturing and operational excellence. Journal of Intelligent Manufacturing, 25(5), 845–847.

    Article  Google Scholar 

  • Chou, M. C., Ye, H., Yuan, X.-M., et al. (2006). Analysis of a software-focused products and service supply chain. IEEE Transactions on Industrial Informatics, 2(4), 295–302.

    Article  Google Scholar 

  • Chungoora, N., Young, R. I., Gunendran, G., Palmer, C., Usman, Z., Anjum, N. A., et al. (2013). A model-driven ontology approach for manufacturing system interoperability and knowledge sharing. Computers in Industry, 64(4), 392–401.

    Article  Google Scholar 

  • Cousins, P. D., Handfield, R. B., Lawson, B., & Petersen, K. J. (2006). Creating supply chain relational capital: The impact of formal and informal socialization processes. Journal of Operations Management, 24(6), 851–863.

    Article  Google Scholar 

  • Cucinotta, T., Palopoli, L., Abeni, L., et al. (2010). On the integration of application level and resource level QoS control for real-time applications. IEEE Transactions on Industrial Informatics, 6(4), 479–491.

    Article  Google Scholar 

  • Despeisse, M., Mbaye, F., Ball, P. D., & Levers, A. (2012). The emergence of sustainable manufacturing practices. Production Planning & Control, 23(5), 354–376.

    Article  Google Scholar 

  • Enrique, E., & Fernando, G. (2012). Towards an integrated crowdsourcing definition. Journal of Information Science, 38(2), 189–200.

    Article  Google Scholar 

  • Fabian, B., Ermakova, T., & Muller, C. (2012). SHARDIS: A privacy-enhanced discovery service for RFID-based product information. IEEE Transactions on Industrial Informatics, 8(3), 707–718.

    Article  Google Scholar 

  • Fang, J., Qu, T., Li, Z., Xu, G. Y., & Huang, G. Q. (2013). Agent-based gateway operating system for RFID-enabled ubiquitous manufacturing enterprise. Robotics and Computer-Integrated Manufacturing, 29(4), 222–231.

    Article  Google Scholar 

  • Figay, N., Ghodous, P., Khalfallah, M., & Barhamgi, M. (2012). Interoperability framework for dynamic manufacturing networks. Computers in Industry, 63(8), 749–756.

    Article  Google Scholar 

  • Gerasimou, G. (2010). Consumer theory with bounded rational preferences. Journal of Mathematical Economics, 46(5SI), 708–714.

    Article  Google Scholar 

  • Ghani, U., Monfared, R. P., & Harrison, R. (2012). Energy optimisation in manufacturing systems using virtual engineering-driven discrete event simulation. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 226(11), 1914–1929.

    Article  Google Scholar 

  • Gumasta, K., Gupta, S. K., Benyoucef, L., & Tiwari, M. K. (2011). Developing a reconfigurability index using multi-attribute utility theory. International Journal of Production Research, 49(6), 1669–1683.

    Article  Google Scholar 

  • Gunasekaran, A., & Yusuf, Y. Y. (2002). Agile manufacturing: A taxonomy of strategic and technological imperatives. International Journal of Production Research, 40(6), 1357–1385.

    Article  Google Scholar 

  • Hameri, A. P. (2011). Production flow analysis-Cases from manufacturing and service industry. International Journal of Production Economics, 129(2), 233–241.

    Article  Google Scholar 

  • Holman, D., Axtell, C., Clegg, C., et al. (2000). Change and innovation in modern manufacturing practices: An expert panel survey of U.K. companies. Human Factors and Ergonomics in Manufacturing & Service Industries, 10(2), 121–137.

    Article  Google Scholar 

  • Hu, J. (2013). Evolving paradigms of manufacturing: From mass production to mass customization and personalization. Procedia CIRP, 7, 3–8.

    Article  Google Scholar 

  • Huang, B. Q., Li, C. H., Yin, C., & Zhao, X. P. (2013). Cloud manufacturing service platform for small- and medium-sized enterprises. International Journal of Advanced Manufacturing Technology, 65(9–12), 1261–1272.

    Article  Google Scholar 

  • Huberman, B. A., Romero, D. M., & Wu, F. (2009). Crowdsourcing, attention and productivity. Journal of Information Science, 35(6), 758–765.

    Article  Google Scholar 

  • Jiao, J. X., You, X., & Kumar, A. (2006). An agent-based framework for collaborative negotiation in the global manufacturing supply chain network. Robotics and Computer-Integrated Manufacturing, 22(3), 239–255.

    Article  Google Scholar 

  • Kalpakjian, S., & Schmid, S. (2006). Manufacturing engineering and technology (5th ed.), Prentice Hall, p. 1192, ISBN 978-7-302-12535-8.

  • Kastalli, I. V., & Van Looy, B. (2013). Servitization: Disentangling the impact of service business model innovation on manufacturing firm performance. Journal of Operations Management, 31(4), 169–180.

    Article  Google Scholar 

  • Koren, Y., Jovane, F., Heisel, U., et al. (1999). Reconfigurable manufacturing systems. CIRP Annals-Manufacturing Technology, 48(2), 6–12.

    Article  Google Scholar 

  • Kyusakov, R., Eliasson, J., Delsing, J., van Deventer, J., & Gustafsson, J. (2013). Integration of wireless sensor and actuator nodes with IT infrastructure using service-oriented architecture. IEEE Transactions on Industrial Informatics, 9(1), 43–51.

    Article  Google Scholar 

  • Li, L. (2011). Assessing the relational benefits of logistics services perceived by manufacturers in supply chain. International Journal of Production Economics, 132(1), 58–67.

    Article  Google Scholar 

  • Li, D. X. (2011). Enterprise systems: State-of-the-art and future trends. IEEE Transactions on Industrial Informatics, 7(4), 630–640.

    Article  Google Scholar 

  • Li, Z. J., Cheng, C. T., & Huang, F. X. (2009). Utility-driven solution for optimal resource allocation in computational grid. Computer Languages, Systems & Structures, 35(4), 406–421.

    Article  Google Scholar 

  • Lian, D., & Li, D. X. (2012). Business intelligence for enterprise systems: A survey. IEEE Transactions on Industrial Informatics, 8(3), 679–687.

    Article  Google Scholar 

  • Makris, S., Michalos, G., & Chryssolouris, G. (2012). RFID driven robotic assembly for random mix manufacturing. Robotics and Computer-Integrated Manufacturing, 28(3), 359–365.

    Article  Google Scholar 

  • Maurer, M., Emeakaroha, B. C., Brandic, I., & Altmann, J. (2012). Cost-benefit analysis of an SLA mapping approach for defining standardized cloud computing goods. Future Generation Computer Systems, 28(1), 39–47.

    Article  Google Scholar 

  • McCarthy, I., & Anagnostou, A. (2004). The impact of outsourcing on the transaction costs and boundaries of manufacturing. International Journal of Production Economics, 88(1), 61–71.

    Article  Google Scholar 

  • McKelvey, B., Wycisk, C., & Huelsmann, M. (2009). Designing an electronic auction market for complex ‘smart parts’ logistics: Options based on LeBaron’s computational stock market. International Journal of Production Economics, 120(2), 476–494.

    Article  Google Scholar 

  • Mehrabi, M. G., Ulsoy, A. G., Koren, Y., & Heytler, P. (2002). Trends and perspectives in flexible and reconfigurable manufacturing systems. Journal of Intelligent Manufacturing, 13(2), 135–146.

    Article  Google Scholar 

  • Meier, H., Roy, R., & Seliger, G. (2010). Industrial Product-Service Systems—IPS2. CIRP Annals-manufacturing Technologies, 59(2), 607–627.

    Article  Google Scholar 

  • Mitsuishi, M., & Nagao, T. (1999). Networked manufacturing with reality sensation for technology transfer. CIRP Annals-Manufacturing Technology, 48(1), 409–412.

    Article  Google Scholar 

  • Ni, Q. F., Lu, W. F., Yarlagadda, P., & Ming, X. G. (2007). Business information modeling for process integration in the mold making industry. Robotics and Computer-Integrated Manufacturing, 23(2), 195–207.

    Article  Google Scholar 

  • Nishino, N., Wang, S. H., Tsuji, N., Kageyama, K., & Ueda, K. (2012). Categorization and mechanism of platform-type product-service systems in manufacturing. CIRP Annals-Manufacturing Technology, 61(1), 391–394.

    Article  Google Scholar 

  • Panetto, H., & Molina, A. (2008). Enterprise integration and interoperability in manufacturing systems: Trends and issues. Computers in Industry, 59(7), 641–646.

    Article  Google Scholar 

  • Pedersen, T. B., Pedersen, D., & Riis, K. (2013). On-demand multidimensional data integration: Toward a semantic foundation for cloud intelligence. Journal of Supercomputing, 65, 217–257.

  • Ray, S. R., & Jones, A. T. (2006). Manufacturing interoperability. Journal of Intelligent Manufacturing, 17(6), 681–688.

    Article  Google Scholar 

  • Rusinko, C. A. (2007). Green manufacturing: An evaluation of environmentally sustainable manufacturing practices and their impact on competitive outcomes. IEEE Transactions on Engineering Management, 54(3), 445–454.

    Article  Google Scholar 

  • Samaddar, S., Rabinowitz, G., & Zhang, G. P. (2005). An experimental analysis of solution performance in a resource sharing and scheduling problem—Production, manufacturing and logistics. European Journal of Operational Research, 165(1), 139–156.

    Article  Google Scholar 

  • Sanchez, L. M., & Nagi, R. (2001). A review of agile manufacturing systems. International Journal of Production Research, 39(16), 3561–3600.

    Article  Google Scholar 

  • Sarraj, R., Ballot, E., Pan, S., & Montreuil, B. (2014). Analogies between Internet network and logistics service networks: Challenges involved in the interconnection. Journal of Intelligent Manufacturing, 25(6), 1207–1219.

    Article  Google Scholar 

  • Sawik, T. (2009). Coordinated supply chain scheduling. International Journal of Production Economics, 120(2), 437–451.

    Article  Google Scholar 

  • Shang, X. Q., Liu, X. W., Xiong, G., Cheng, C. J., Ma, Y. H., & Nyberg, T. R. (2013). Social manufacturing cloud service platform for the mass customization in apparel industry. Proceedings of 2013 IEEE international conference on service operations and logistics, and informatics, Dongguan, China (pp. 220–224).

  • Shen, W. M., Hao, Q., Wang, S. Y., Lia, Y. S., & Ghenniwa, H. (2007). An agent-based service-oriented integration architecture for collaborative intelligent manufacturing. Robotics and Computer-Integrated Manufacturing, 23(3), 315–325.

    Article  Google Scholar 

  • Shokohyar, S., Mansour, S., & Karimi, B. (2014). A model for integrating services and product EOL management in sustainable product service system (S-PSS). Journal of Intelligent Manufacturing, 25(3), 427–440.

    Article  Google Scholar 

  • Sindicic, I., Bogdan, S., & Petrovic, T. (2011). Resource allocation in free-choice multiple reentrant manufacturing systems based on machine-job incidence matrix. IEEE Transactions on Industrial Informatics, 7(1), 105–114.

    Article  Google Scholar 

  • Smith, S., Smith, G. C., Jiao, R., & Chu, C. H. (2013). Mass customization in the product life cycle. Journal of Intelligent Manufacturing, 24(5), 877–885.

    Article  Google Scholar 

  • Tao, F., & Yefa, H. (2009a). An approach to manufacturing grid resource service scheduling based on trust-QoS. International Journal of Computer Integrated Manufacturing, 22(2), 100–111.

  • Tao, F., Yefa, H., et al. (2009b). Study on manufacturing grid resource service QoS modeling and evaluation. International Journal of Advanced Manufacturing Technology, 41(9–10), 1034–1042.

  • Tao, F., Zhang, L., & Nee, A. Y. C. (2011). A review of the application of grid technology in manufacturing. International Journal of Production Research, 49(13), 4119–4155.

    Article  Google Scholar 

  • Tao, F., Zhang, L., et al. (2011). Cloud manufacturing: A computing and service-oriented manufacturing model. Proceedings of The Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 225(10), 1969–1976.

    Article  Google Scholar 

  • Tao, F., Guo, H., Zhang, L., & Cheng, Y. (2012). Modelling of combinable relationship-based composition service network and the theoretical proof of its scale-free characteristics. Enterprise Information Systems, 6(4), 373–404.

    Article  Google Scholar 

  • Tao, F., Cheng, Y., Zhang, L., & Zhao, D. M. (2012). Utility modelling, equilibrium, and coordination of resource service transaction in service-oriented manufacturing system. Proceedings of The Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 226(B6), 1099–1117.

    Article  Google Scholar 

  • Tao, F., LaiLi, Y. J., Xu, L. D., & Zhang, L. (2013). FC-PACO-RM: A parallel method for service composition optimal-selection in cloud manufacturing system. IEEE Transactions on Industrial Informatics, 9(4), 2023–2033.

    Article  Google Scholar 

  • Tao, F., Cheng, Y., Xu, L. D., Zhang, L., & Li, B. H. (2014). CCIoT-CMfg: Cloud computing and Internet of Things based cloud manufacturing service system. IEEE Transactions on Industrial Informatics, 10(2), 1435–1442.

    Article  Google Scholar 

  • Tao, F., Feng, Y., & Zhang, L. (2014). CLPS-GA: A case library and pareto solution-based hybrid genetic algorithm for energy-aware cloud service scheduling. Applied Soft Computing, 19, 264–279.

    Article  Google Scholar 

  • Tao, F., Zuo, Y., Xu, L. D., & Zhang, L. (2014). IoT-based intelligent perception and access of manufacturing resource toward cloud manufacturing. IEEE Transactions on Industrial Informatics, 10(2), 1547–1557.

    Article  Google Scholar 

  • Tibaut, A., Rebolj, D., & Perc, M. N. (2014). Interoperability requirements for automated manufacturing systems in construction. Journal of Intelligent Manufacturing. doi:10.1007/s10845-013-0862-7.

  • Tiwari, M. K., Jha, S. K., & Anand, R. B. (2010). Operation allocation and part type selection in E-manufacturing: An auction based heuristic supported by agent technology. Robotics and Computer-Integrated Manufacturing, 26(4), 312–324.

    Article  Google Scholar 

  • Ueda, K., Takenaka, T., Vancza, J., & Monostori, L. (2009). Value creation and decision-making in sustainable society. CIRP Annals-Manufacturing Technology, 58(2), 681–700.

    Article  Google Scholar 

  • Ugarte, B., Artiba, A., & Pellerin, R. (2009). Manufacturing execution system-a literature review. Production Planning & Control, 20(6), 525–539.

    Article  Google Scholar 

  • Ulieru, M., & Cobzaru, M. (2005). Building holonic supply chain management systems: An e-logistics application for the telephone manufacturing industry. IEEE Transactions on Industrial Informatics, 1(1), 18–30.

    Article  Google Scholar 

  • Valilai, O. F., & Houshmand, M. (2013). A collaborative and integrated platform to support distributed manufacturing system using a service-oriented approach based on cloud computing paradigm. Robotics and Computer-Integrated Manufacturing, 29(1), 110–127.

    Article  Google Scholar 

  • Vanderster, D. C., Dimopoulos, N. J., Parra-Hernandez, R., & Sobie, R. J. (2009). Resource allocation on computational grids using a utility model and the knapsack problem. Future Generation Computer Systems, 25(1), 35–50.

    Article  Google Scholar 

  • Viriyasitavat, W., Xu, L. D., & Martin, A. (2012). SWSpec: The requirements specification language in service workflow environments. IEEE Transactions on Industrial Informatics, 8(3), 631–638.

    Article  Google Scholar 

  • Wang, X. V., & Xu, X. W. (2013). An interoperable solution for cloud manufacturing. Robotics & Computer-integrated Manufacturing, 29(4), 232–247.

    Article  Google Scholar 

  • Wang, L. H. (2013). Machine availability monitoring and machining process planning towards Cloud manufacturing. CIRP Journal of Manufacturing Science and Technology, 6(4), 263–273.

    Article  Google Scholar 

  • Wang, S. G., Liu, Z. P., Sun, Q. B., Zou, H., & Yang, F. C. (2014). Towards an accurate evaluation of quality of cloud service in service-oriented cloud computing. Journal of Intelligent Manufacturing, 25(2), 283–291.

    Article  Google Scholar 

  • Wang, L. H., Wang, X. V., Gao, L., & Vancza, J. (2014). A cloud-based approach for WEEE remanufacturing. CIRP Annals - Manufacturing Technology, 63(1), 409–412.

    Article  Google Scholar 

  • Witsch, M., & Vogel-Heuser, B. (2012). Towards a formal specification framework for manufacturing execution systems. IEEE Transactions on Industrial Informatics, 8(2), 311–320.

    Article  Google Scholar 

  • Wu, D. Z., Thames, J. L., Rosen, D. W., & Schaefer, D. (2013). Enhancing the product realization process with cloud-based design and manufacturing systems. Journal of Computing and Information Science in Engineering, 13(4), 1–14.

    Article  Google Scholar 

  • Wu, Q. W., Zhu, Q. S., & Zhou, M. Q. (2014). A correlation-driven optimal service selection approach for virtual enterprise establishment. Journal of Intelligent Manufacturing, 25(6), 1441–1453.

    Article  Google Scholar 

  • Xiang, W., Song, F. S., & Ye, F. F. (2014). Order allocation for multiple supply-demand networks within a cluster. Journal of Intelligent Manufacturing, 26(6), 1367–1376.

    Article  Google Scholar 

  • Xu, X. (2013). Cloud technology for service-oriented manufacturing. In: 20th ISPE International Conference on Concurrent Engineering: Proceedings (pp. 540–550). Netherlands: Amsterdam.

  • Xu, L. D., Viriyasitavat, W., Ruchikachorn, P., & Martin, A. (2012). Using propositional logic for requirements verification of service workflow. IEEE Transactions on Industrial Informatics, 8(3), 639–646.

    Article  Google Scholar 

  • Yao, J., & Liu, L. (2009). Optimization analysis of supply chain scheduling in mass customization. International Journal of Production Economics, 117(1), 197–211.

    Article  Google Scholar 

  • Yao, Y. R., Watson, E., & Kahn, B. K. (2010). Application service providers: Market and adoption decisions. Communications of The ACM, 53(7), 113–117.

    Article  Google Scholar 

  • Yeung, W.-K., Choi, T.-M., & Cheng, T. C. E. (2011). Supply chain scheduling and coordination with dual delivery modes and inventory storage cost. International Journal of Production Economics, 132(2), 223–229.

    Article  Google Scholar 

  • Yin, C., Huang, B. Q., Liu, F., Wen, L. J., Wang, Z. K., Li, X. D., et al. (2011). Common key technology system of cloud manufacturing service platform for small and medium enterprises. Computer Integrated Manufacturing Systems, 17(3), 495–503.

    Google Scholar 

  • Yip, A. L. K., Corney, J. R., Jagadeesan, A. P., & Qin, Y. (2013). A product configurator for cloud manufacturing. In ASME 2013 International Manufacturing Science and Engineering Conference, Madison, WI, USA. p. V002T02A010.

  • Zeballos, L. J. (2010). A constraint programming approach to tool allocation and production scheduling in flexible manufacturing systems. Robotics and Computer-Integrated Manufacturing, 26(6SI), 725–743.

  • Zhan, D. C., Zhao, X. B., Wang, S. Q., Cheng, Z., Zhou, X. Q., Nie, L. S., et al. (2011). Cloud manufacturing service platform for group enterprises oriented to manufacturing and management. Computer Integrated Manufacturing Systems, 17(3), 487–494. (in Chinese).

    Google Scholar 

  • Zhao, Y., Xu, X., & Kramer, T. (2011). Dimensional metrology interoperability and standardization in manufacturing systems. Computer Standards & Interfaces, 33(6), 541–555.

    Article  Google Scholar 

  • Zhong, R. Y., Dai, Q. Y., Qu, T., Hu, G. J., & Huang, G. Q. (2013). RFID-enabled real-time manufacturing execution system for mass-customization production. Robotics and Computer-Integrated Manufacturing, 29(2), 283–292.

    Article  Google Scholar 

Download references

Acknowledgments

This work is financially supported in part by the NSFC project (51475032, 61374199), the Beijing Youth Talent Plan under Grant 29201411, Beijing Natural Science Foundation (4152032), and the Fundamental Research Funds for the Central Universities in China.

Author information

Authors and Affiliations

  1. School of Automation Science and Electrical Engineering, Beihang University (Beijing University of Aeronautics and Astronautics, BUAA), Beijing, 100191, People’s Republic of China

    F. Tao, Y. Cheng & L. Zhang

  2. Department of Mechanical Engineering, National University of Singapore, Singapore, 119077, Singapore

    A. Y. C. Nee

Authors
  1. F. Tao
    View author publications

    You can also search for this author inPubMed Google Scholar

  2. Y. Cheng
    View author publications

    You can also search for this author inPubMed Google Scholar

  3. L. Zhang
    View author publications

    You can also search for this author inPubMed Google Scholar

  4. A. Y. C. Nee
    View author publications

    You can also search for this author inPubMed Google Scholar

Corresponding author

Correspondence to F. Tao.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tao, F., Cheng, Y., Zhang, L. et al. Advanced manufacturing systems: socialization characteristics and trends. J Intell Manuf 28, 1079–1094 (2017). https://doi.org/10.1007/s10845-015-1042-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10845-015-1042-8

Keywords